Primer and antirust paint for surface of black metal in light or
middle-degree corrosive industrial situations, unsuitable for the
position under the water.
Properties: Good antirust, quick drying, and excellent adhesion
Physical Parameter: Color: Tangerine, mat gloss
Density: Approx. 1.90 kg/L
Film Thickness: WFT: 75μ M DFT: 40μ M
Theoretic Dosage: 0.15 kg/m2
Flash Point: 38º C
Drying Time: 23º C, Dust-Free: ≤ 4 h, Hard Drying: ≤ 24 h
Storage: 1 year
Application Parameter: Formula Ratio: One pot
Curing Time: Use after being opened and fully stirred
Pot Life: Infinite
Coating Method: Hand brushing, roll coating, unsuitable for
Diluent/ Dilution Ratio: Diluent for 104 alkyd resin coatings,
Surface Treatment: Sand blasting till qualified to SA 2.5 or hand
rubbing till qualified to St3, secondary rust removing must be made
on surface of shop primer till qualified to St3.
Pre- Coat Accessory Coatings: All kinds of shop primer or directly
coating on surface of derusted steel.
Post-Coat Accessory Coatings: Alkyd resin coatings
Coating Interval: 23º C, Min. 8 h; Max. 4 d
Note: Please convert the tank for a day or two before using because
red lead powder has biggish proportion, and fully stir after open
the tank. Not to be used directly on zinc or aluminum board.
Claim: The data in this Specification is derived from experiments
and practical applications, and can be regarded as a guide for
application. The title product is only for specialty application.
Otherwise we only guarantee the quality of the said coating itself
if it is used in other sectors undescribed herein or fresh sectors.
Alkyd Red Lead Antirust Paint (C53-31) Images