Shop Primer and Primer -- H06 Epoxy Zinc Rich Shop Primer (H702)
Component: Epoxy resin as binder, ultra-fine zinc powder, polyamide
resin as curing agent, additives and solvent, etc.
Application: Maintenance primer for gloss finished or abrasive
blasted surface of steel, warranty period: 9 months.
Properties: Cathodic protection, good adhesion, excellent
resistance to rust, oil and water, very few damage areas and no
influence on the jointing property when cut by electric welding.
Physical Parameter: Color: Grey
Density: 2.3 kg/L
Film Thickness: WFT: 40μm DFT: 20μm
Theoretic Dosage: 0.1 kg/m2
Flash Point: Component A, 24º C; Component B, 27º C
Drying Time: 23º C, Dust-Free: ≤ 0.5 h, Hard Drying: ≤ 24 h, Fully
Curing: 7d
Storage: 1 year
Application Parameter: Formula Ratio: Component A: Component B = 9:
1 (Weight Ratio)
Curing Time: 23º C, 30min
Pot Life: (23º C) 8 h, unsuitable for application below 5º C
Coating Method: Spraying, hand brushing, roll coating
Diluent/ Dilution Ratio: Diluent for F102 epoxy resin coatings,
Surface Treatment: Used on pipeline in workshop, sand blasting must
be made on surface of steel till qualified to SA2.5, surface
asperity: 30~75μm
Post-Coat Accessory Coatings: Coatings of chlorinated rubber, epoxy
resin, acrylic resin, chlorosulphonated polyethylene and perchloric
polyethylene, but unsuitable to be used with oil coatings, alkyd
coatings and polyester coatings.
Coating Interval: 23º C, Min. 24 h, Max. Several months
Claim: The data in this Specification is derived from experiments
and practical applications, and can be regarded as a guide for
application. The title product is only for specialty application.
Otherwise we only guarantee the quality of the said coating itself
if it is used in other sectors undescribed herein or fresh sectors.
|
|
Shop Primer Images
|
