Component: Two-component (A and B) coatings made from epoxy resin,
MIO, plasticity agent for antirust pigment, and curing agent.
Application: Anti-corrosion primer, semi-paint for anticorrosion
coating, increasing the properties of sealing and anticorrosion
used with epoxy zinc rich primer.
Properties: Excellent properties of sealing and adhesion on zinc
rich primer and zinc coating, hard film, resistance to wear,
keeping impact resistance and elasticity for a long-term, good
durability, good ply adhesion with post-coat paint.
Physical Parameter: Color: Grey or brown
Density: 1.37 kg/L
Film Thickness: WFT: 95μ M DFT: 50μ M
Theoretic Dosage: 0.14 kg/m2
Flash Point: Component A (Binder) 27º C; Component B (Curing Agent)
Drying Time: 23º C, Dust-Free: ≤ 2 h, Hard Drying: ≤ 24 h, Fully
Storage: 1 year
Application Parameter: Formula Ratio: Component A: Component B =
10: 1 (Weight Ratio)
Curing Time: 23º C, 30 min
Pot Life: 23º C, 8 h, unsuitable for application below 5º C
Coating Method: Spraying, hand brushing, roll coating
Diluent/ Dilution Ratio: Diluent for 102 epoxy resin coatings,
Surface Treatment: Sand blasting must be made on surface of steel
till qualified to SA 2.5 or hand rust removing till qualified to St
Pre-Coat Accessory Coatings: Zinc rich primer and epoxy iron red
antirust paint, etc.
Post-Coat Accessory Coatings: Top coat of epoxy, epoxy asphalt,
chlorinated rubber, polyurethane and acrylic acid, etc.
Coating Interval: 23º C, Min. 6 h, Max. 30d
Claim: The data in this Specification is derived from experiments
and practical applications, and can be regarded as a guide for
application. The title product is only for specialty application.
Otherwise we only guarantee the quality of the said coating itself
if it is used in other sectors undescribed herein or fresh sectors.
H53-6 Epoxy Mio Antirust Paint Images